V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Position mobile jack 998 5972 with fixture 999 5972 , so that it is in light contact under the right-hand side of the sub-frame.
Remove the sub-frame screws on the right-hand side. Unscrew the screws so that at least five threads remain. Remove the jack.
Ensure the wheel spindle is twisted for turning left. Unhook the control arm from the ball joint. Remove the drive shaft from the hub. Install protective
socket 999 5562 . Lock the protective socket into place with the nut for the ball joint.
Move the spring strut slightly backwards. Take care that the control arm does not damage the drive shaft boot.
Lowering the sub-frame
Position the mobile jack lightly applied under the left side of the sub-frame. Remove the front and rear screws from the sub-frame.
Carefully lower the frame a little. Check that the screws for the steering gear release from the frame and the control arm releases from the ball joint.
Lower the sub-frame completely and let it hang free.
Draining the transmission fluid
