V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Remove:
-
the connectors for the solenoid valves
-
the screw for the oil temperature sensor holder. Remove the sensor from the control system
-
the cable harness from the holders on the control system.
Remove the cable harness.
Installation
Connecting the cable harness
Lubricate the O-rings for the cable harness grommet and the oil temperature sensor with automatic transmission fluid.
Install:
-
the cable harness. Connect the connectors to the solenoids
-
the oil temperature sensor with the holder and screw. Tighten to 10 Nm
-
the cable harness on the holder. Check that the cable harness is correctly positioned.
