V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Remove the shift cable at the shift lever using 999 7077 Jimmy bar See: Tools and Equipment/999 7077 Jimmy Bar.
Removing the shift lever
Press out the spring pin using a pressing tool. Use 999 7221 Press tool See: Tools and Equipment/999 7221 Press Tool. Use the long pressure pin.
Remove the lever.
Removing the seal
Carefully tap down the tool (999 7219 Extractor See: Tools and Equipment/999 7219 Extractor ) in the bottom of the shift shaft.
Tighten the bolt on the puller.
Screw in a new M12 bolt in the top of the puller until the seal releases.
Remove the seal.
Caution! Clean away any rust from the shaft.
Use grinding cloth 951 1024 or a very fine emery cloth to clean the shaft.
Clean around the shaft with isopropylalcohol and blow it clean with compressed air.