V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
-
the transmission cable harness to the connectors
-
the gear selector cable and bracket. Tighten. See applicable specifications.
Connect the cable to the lever.
Installing the cable harness and transmission cables.
Note! Applies only to model year 2001.
Turn in the tab on the cable harness holder.
Install:
-
the screw for the gear shift position sensor holder. Tighten. See the relevant specifications.
-
the lever for the gear shift linkage rod. Tighten the nut. See applicable specifications.
Installing the connector and cable harness
Hook the connectors into place on the mounting. Connect the connectors.
Install:
-
the tie straps around the cable harness. Secure the cable harness in the cover for the control system
-
the mounting for the cable harness on the bracket for the air cleaner (ACL)
-
the gear selector cable and bracket. Tighten. See applicable specifications. Connect the cable to the lever.