volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Audio Unit, Replacing|Page 19927 > < Audio Unit, Replacing|Page 19925
Page 10
background image

-

Shift the gear selector lever into rearmost position

-

Pull the panel (1) with the boot backward as far as possible

-

Remove the screws (2) from the dashboard environment panel (3).

-

Angle the dashboard environment panel outwards so that it is possible to insert a couple of fingers between the centre console and the side of the
dashboard environment panel

-

Detach the dashboard environment panel by pulling it downwards while maintaining the same angle. Some force is required because the panel is
tightly installed

-

Disconnect the connectors on the reverse of the dashboard environment panel. Place the dashboard environment panel to one side.

Note! If any of the outer hooks break off, these must be repaired. The method for this can be found in the service information in the section
covering the dashboard.

-

Remove the screws (1) from the radio bracket

-

Pull out the bracket. Pull the lower corner while pressing downwards.

Audio Unit, Replacing|Page 19927 > < Audio Unit, Replacing|Page 19925