volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Adapter 7 to 4 Pole Wiring For Towing|Page 21487 > < Adapter 7 to 4 Pole Wiring For Towing|Page 21485
Page 11
background image

-

Detach the trailer module (TRM) from the Velcro fastener on the back side of the plate in front of the fuse holder.

-

Plug in the tow bar wiring connectors:
-

green (GN) and grey (GR) connectors to the control module.

-

black (SB) connector to the fuse holder.

-

Reinstall the control module.

-

Secure the excess cable with a tie strap from the kit.

-

Insert fuses from the kit in the following positions in the fuse holder (REM):
-

20A in position 20 (mini fuse) if the charging function according to step  Tow bar wiring, 7-pin See:   has been selected

-

25A in position 29

-

25A in position 30

-

Plug in the connectors for sill trim panel lighting and reinstall the panel.

-

Reinstall the folding panels.

-

Reinstall the cargo compartment carpet.

Applies to connection of the function for automatic rear fog lamp deactivation
Note!
 The function requires car-specific software. Program the software according to the service information described in VIDA.

Checking the 7-pin connector:

Adapter 7 to 4 Pole Wiring For Towing|Page 21487 > < Adapter 7 to 4 Pole Wiring For Towing|Page 21485