V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Transfer the nozzles. See: Nozzle high-pressure washer headlamp, replacing.
Installation
Installing the front bumper
NOTE: For tightening torques, see: Specifications.
Install:
-
the quick-release connector for the headlamp washer.
-
the 2 connectors for the fog lamps.
Guide the lugs (3) in to the grooves on the side bracket (4).
Press at the top so that the lugs engage.
Press in the bumper cover as far as it will go.
HINT: This operation is easier with two people.
Install:
