V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Note! Use newscrews for the sub-frame mountings.
-
Slide up the centering sleeves in the two rear mountings on the sub-frame
-
Install the screw. Tighten lightly
-
Install the screws for the front mountings on the sub-frame. Install the screws through the brackets
-
Install the screw for the brackets
-
Tighten all the front mountings. Tighten to 80 Nm
-
Remove the screw for the rear mountings on the sub-frame. Remove the centering sleeves
-
Install the screws for the rear mountings on the sub-frame. Tighten to 80 Nm
-
Install the fuel filter and holder on the right bracket. Tighten to 25 Nm.
Remove the lifting table.
Finishing