V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Vacuum Brake Booster: Service and Repair
Pedal Position Sensor, Replacing
Pedal Position Sensor, Replacing
NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Preparatory work
Ignition off.
Press the brake pedal a few times until the pedal becomes stiff and rises slightly. This releases the vacuum in the power brake booster and thus prevents
the O-ring from being sucked in when the pedal position sensor is removed.
Removal
Removing pedal position sensor