V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Applies to cars with V8 engine
-
Remove the branch connector with the cables from the underside of the plate beneath the headlamp. Remove the screw, nut and washer (1) and tie
strap (2), and pull the branch connector forward.
Applies to cars with 5 and 6-cylinder engines
-
Remove the branch connector with the cables from the underside of the plate beneath the headlamp by removing the screw and the nut (1).
-
Cut away the tie strap (2).
Applies to all models
-
Remove the locking sleeves over the joints on the branch connector and pull the cables away from it.
-
Place the branch connector to one side, it shall not be re-used.
