V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
-
Remove the protective backing tape from the other Velcro piece.
-
Move the floor and insulating mat out of the way.
-
Scrape away any sealant from the flat surface at the lower edge of the A-post where the receiver unit for the remote start is to be located.
-
Clean the surface using isopropanol P/N 1161721. Wipe dry.
-
Press the receiver unit securely onto the panel surface, 10 mm (25/64") under the cable lead-in for the side door.
