V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Check that the timing gear pulley is still in the limit position in the oval holes.
Tighten the center screw in the VVT unit. See Tightening torque See: Specifications/Tightening Torque.
Check that the variable valve timing unit does not rotate when tightening. Install the center plug. Tighten. See Tightening torque See:
Specifications/Tightening Torque.
Turn the variable valve timing unit clockwise to the limit position. Turn the timing gear pulley so that the markings correspond.
Finishing
Tighten the center screw on the timing belt tensioner. Tighten to 5 Nm.
Installing the timing belt
