V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
-
the nut for the ball joint and control arm. Counterhold the ball joint pinion so that the boot does not twist. Use a Torx wrench.
NOTE: Clean the exposed threads outside the nut. Spray using rust solvent before removing the nut.
Removing The Drive Shaft
Pull the control arm down. Use: 999 7076. Move the wheel spindle to the side. At the same time, install protective sleeve 999 5562 on the ball joint
pinion. Hold the sleeve in place using the nut for the ball joint.
