V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Installation
Installing the damper motor module (DMM) for recirculation
Install:
-
the control module in position. Adjust the shaft journal in relation to the mechanism (1) so that it goes in
-
the 2 screws. Tighten alternately
-
the switch. Ensure that it is correctly positioned
-
the glove compartment. See Glove compartment, replacing, B5244T5, B5254T2 See: Body and Frame/Interior Moulding / Trim/Glove
Compartment/Service and Repair
Note! Identify the damper motor module (DMM) for recirculation. See VIDA vehicle communication.
Finishing
Testing the climate control system
Carry out a performance test on the climate control unit. See: Climate system, performance test See: Testing and Inspection/Component Tests and
General Diagnostics/Climate System, Performance Test
R.H.D.
Damper motor module (DMM) recirculation, replacing