V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
-
the control module.
Installation
Installing the damper motor module (DMM) for temperature on the passenger side
Install:
-
the control module in position. Adjust the shaft journal so that it goes in
-
the 2 screws. Tighten alternately
-
the switch. Ensure that it is correctly positioned
-
the glove compartment. See Glove compartment, replacing, B5244T5, B5254T2 See: Body and Frame/Interior Moulding / Trim/Glove
Compartment/Service and Repair.
Note! Identify the damper motor module (DMM) for temperature. See VIDA vehicle communication.
Removal
Removing the damper motor module (DMM) for temperature on the driver's side