V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Hook the headlamp guard into place. Secure the hook on the previously installed mounting strip in the hole in the top edge of the headlamp guard as
follows:
-
Slide the mounting strip forward as far as possible. Ensure that the mounting strip is not concealed under the weatherstrip. Press the front edge of
the mounting strip downwards. Slide the hole for the headlamp guards over the hook. Secure the hook in the hole.
-
Grasp the free end of the mounting strip. Pull the mounting strip backwards. Hook the mounting strip around the edge in the headlamp. At the
same time, press the headlamp guard towards the headlamp
-
Check that the guard is properly secured.
Removing when cleaning and replacing
The headlamp guards must be removed when using a car wash. Carry out the procedure in points 1, 5, 6, 7 reverse order.
The headlamp guards must also be removed when cleaning the headlamps and the inside of the headlamp guards. This must be carried out regularly to
prevent deterioration in the function of the headlamps.
Note! Do not use strong washing agents which can affect the transparency of the headlamps and therefore the function.
Note! The headlamp guard is a perishable component which must be replaced when necessary. When replacing the headlamp guards, all the
components in the kit must be used. Do not reuse the old components.
