V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Continue - Fault Found
-------------------------------------------------
Checking the cable for the relay
Check the cable between cental electronic module (CEM) terminal #19A and horn relay (2/17) terminal #2 for an open-circuit according to Checking
wiring and terminals. Permanent fault See: Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and Terminals/Checking
Wiring and Terminals. Permanent Fault.
Also check the connector for an open-circuit according to Checking wiring and terminals. Permanent fault See: Testing and Inspection/Component Tests
and General Diagnostics/Checking Wiring and Terminals/Checking Wiring and Terminals. Permanent Fault.
Hint: The fault may have been caused by an open-circuit in the supply to the relay.
The voltage must be 12 V at both terminals #1 and #2 for relay 2/17.
In particular, check that fuse 9 in the integrated relay / fusebox in the engine compartment is intact.
Try a new horn relay (2/17).
Remedy as necessary.
Other information
-
For further information about signals and other values, see Signal specification See: Body and Frame/Body Control Systems/Testing and
Inspection/Pinout Values and Diagnostic Parameters.
-
To connect the breakout box, see Connecting the breakout box See: Body and Frame/Body Control Systems/Testing and Inspection/Pinout Values
and Diagnostic Parameters/Connecting the Breakout Box/Connecting the Breakout Box, Central Electronic Module (CEM).
