V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Release the upper catches using a weatherstrip tool. Lift out the control module.
Note! Check that the control module's connectors are intact.
Installing the passenger door module (PDM)
Press the control module into place.
Install:
-
the connectors
-
the nut and screw
-
the door panel, see Replacing the front door side panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
and Repair/Removal and Replacement/Front Door Side Panel.
Ordering software
Order software for the passenger door module (PDM) according to the table below.
Finishing
Initialise the window position in the communication input.
Rear Electronic Module (REM), Replacing
Rear electronic module (REM), replacing
Note! Since the illustrations in this service information are used for different model years and/or models. Some variation may occur. However,
the essential information in the illustrations is always correct.
Preparatory work
