V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Installation
NOTE: For tightening torques, see: Specifications.
Installing the thermostat housing
Install:
^
the hose for the water heated crankcase ventilation. Before installing the thermostat housing, use a new hose clamp
^
a new gasket
^
the thermostat housing assembly. Tighten the screws
^
the upper radiator hose. Tighten the hose clamp.
Connect the connector for the temperature sensor.
Finishing
NOTE: Ensure that the auxiliaries belt is correctly positioned on all the pulleys.
Install:
^
the power steering pump.
Tighten the 3 x screws
^
the auxiliaries belt. Use 999 7109
^
the upper camshaft cover.
Installing control modules
CAUTION: Check that no pins or sockets are damaged on the connector.
