V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Replacing the Thermostat and/or Engine Coolant Temperature Sensor
Thermostat / temperature sensor, engine coolant, replacing
Special tools:
951 2885
999 5722
999 7109
951 2953
951 2957
NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removing / installing
Removing the engine coolant temperature (ECT) sensor
Remove:
^
the upper timing belt cover. Disconnect the connector for the temperature sensor
^
the temperature sensor from the thermostat housing. Use 951 2885.
NOTE: Put paper underneath the sensor to prevent coolant spillage.
Installing the engine coolant temperature (ECT) sensor
Install:
^
the sensor with a new seal.
Tighten. See: Summary of specific components and tightening torques (Specifications). Use: 951 2885
^
the upper timing belt cover.
Removal
Preparation
