V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
essential information in the illustrations is always correct.
Removal
Removing bevel gear
Remove the bevel gear.
Carry out corrective action at worn splines in the sleeve
Cut out a -40 mm cardboard disc and use it to prevent swarf entering the gearbox. Apply a thick bead of grease or petroleum jelly on the seal in the
sleeve. Press the cardboard disc against the seal.
Grind a groove in the inside of the sleeve to 999 5777 Extractor See: Tools and Equipment/999 5777 Extractor secure the expander.
The sleeve can also be heated using a hot air gun or induction heater.