V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
-
Install the panel and gear selector lever boot around the gear selector lever.
-
Reinstall the support ring on the gear selector lever
-
Take the gear selector lever knob. Ensure that the support ring is straight in its groove in the gear selector lever
-
Press the knob down over the support ring so that it locks.
-
Pull up the panel with the boot towards the gear selector lever knob
-
Pull the locking sleeve up to the gear selector lever knob. Turn the locking sleeve slightly so that the guide (1) inside the locking sleeve is correctly
positioned on the notch (2) on the gear selector lever knob
-
Pull the locking sleeve until it locks. Check that the locking sleeve is securely mounted on the gear selector lever knob. Pull the gear selector lever
knob to check that it is securely mounted
-
Lower the panel. Press the panel into place in the centre console.
Gear Selector Lever Knob, Spaceball
Gear selector lever knob, Spaceball
