V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Check that there are no cracks or large scratches on the flywheel.
To replace the flywheel, see Flywheel, B5254T2, M58, B5254T2, M56 See: Flywheel/Service and Repair.
Check radial run-out. Refer to: Flywheel, radial clearance, checking, M58, M66, M66 AWD, M56 See: Manual Transmission/Transaxle/Testing and
Inspection/Component Tests and General Diagnostics
Installation
Note! For tightening torques, see the relevant procedure.
Installing the centering tool for the clutch driven plate
Use centering drift 999 5663 Centering tool See: Tools and Equipment/999 5663 Centering Tool , alternatively together with 999 5675 Socket See:
Tools and Equipment/999 5675 Socket. The drift is modified with conversion kit 998 9742 Conversion kit See: Tools and Equipment/998 9742
Conversion Kit.
Remove the cone from the centering tool.
Install the centering tool in the flywheel center as far in as possible.
Use a wrench as a counterhold for the outer section of the centering tool. Tighten the nut so that the expander locks the centering tool in the crankshaft.
Ensure that the centering drift is secure in the crankshaft.
Installing the clutch driven plate
Caution! Turn the side of the clutch driven plate hub marked "Transmission side" outward. If the marking on a previously used clutch driven
