V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Install the anti-roll bar in the rear axle member. Use an M12 screw. Use new locknuts.
Note! Ensure that the cable for the parking brake passes below the ends of the anti-roll bar. Press the cables into place in the clamps on the
heat deflector plate.
Installing the link arm and track rod
Install:
-
the control arms using new screws. Finger tighten.
-
the track rod. Use new lock nuts. Finger tighten.
Installing the position sensor (Four-C only)
Install the position sensors according to: Position sensor suspension rear (Four-C), replacing See: Sensors and Switches/Sensors and Switches - Steering
and Suspension/Sensors and Switches - Suspension/Ride Height Sensor/Service and Repair.
Installing the torque arm and anti-roll bar link
