V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Applying liquid gasket
-
Wipe the oil film off the mating surfaces on the camshaft cover and cylinder head.
-
Install new O-rings around the spark plug wells at the cylinder head.
-
Apply liquid gasket 1161 059 on the camshaft cover. Use roller 951 2767.
NOTE: The surface must be completely covered without any excess.
CAUTION: Ensure that no liquid gasket gets in to the oil ducts.
Installing the camshaft covers
-
Lubricate the camshaft lobes, the camshaft bearing surfaces and the valve lifters.
-
Install the camshaft cover.
-
Install press tool 999 5454 (2x).
-
Tighten the camshaft cover screws alternately, keeping it parallel to the cylinder head using the press tools.
-
Install all the screws. Tighten the screws from the middle and outwards.
-
Remove the press tool 999 5454
Install
-
the variable valve timing (VVT) solenoid. Use a new gasket
-
the spark plugs. Tighten to 30 Nm
