V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Receiver Dryer: Service and Repair
Pipe, Receiver/Drier, Replacing
Pipe Receiver Drier, Replacing
Removal
-
Remove the condenser.
-
Detach the pipe coupling from the receiver/dryer
-
Detach the pipe from the bracket. Remove the pipe.
Installation
NOTE: Use new O-rings lubricated with compressor oil.
-
Position the pipe on the mounting in the bracket. Position the pipe coupling on the receiver/dryer
-
Position the screw and tighten the pipe coupling on the condenser. Tighten to 10 Nm.
-
Install the condenser.