V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
-
Check the valve play with feeler gauge 999 5752 at cylinder. 1 intake valves and cylinder 4 exhaust valves.
-
Insert the feeler gauge through the inspection holes. Bend the feeler gauge with light finger pressure so that it follows the top of the valve lifter.
-
The correct measurement will not be obtained until the feeler gauge has gone in approximately 15 mm.
Reference values
Valve:..........................................................................................................................................................................................................Valve clearance:
Intake valve.....................................................................................................................................................................................................0.15 - 0.45 mm
Exhaust valve..................................................................................................................................................................................................0.35 - 0.60 mm
CAUTION: This is only the check value.
NOTE: Carry out this check with the engine at room temperature.
Make a note of the valve clearance on a form.
Next test measurement
Turn the crankshaft in the direction of engine rotation until the next marking In2/Ex5 is opposite the flange on top of the cylinder head. Perform the test
measurement according to the previous description.
Continue by measuring the remaining valve clearances according to the markings on tool 999 5754.
