V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Preparations
-
Carefully tap the end of the valve stem to ensure that the valve is correctly located in the seat.
-
Use a plastic, aluminum or brass drift to protect the valve and the surface of the valve lifter.
-
The sound made by tapping reveals if the valve is correctly seated.
Installing the camshaft and valve lifter
-
Install both the valve lifters for the inlet valves at cylinder 1.
-
Check the notes made earlier. Select new valve lifters if necessary.
NOTE: Only install two valve lifters. The valve lifters should be placed at the same cylinder.
Other valve lifters are available as replacement part/replacement part kits.
The valve clearance on a cold engine (approximately 20 degree C) should be:
