V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Installation
Note! Only tighten the nuts and screws when the suspension is in the normal drive position.
Position the car on a wheel track hoist.
Tighten the screws for the shock absorber and torque rod on both sides.Torque: M12, 80 Nm
Install the protective covers over the shock absorber mounting.
To install, reverse the removal procedure.
Check the rear wheel alignment. Refer to: Wheel alignment, checking / adjusting See: Alignment/Service and Repair
