V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Install the adjustment nut.
Use wrench 999 5371 NUTS-DIFF.BEARING) 1035 See: Tools and Equipment/999 5371 Nuts-Diff.Bearing) 1035 Turn the propeller shaft when the
nut is tightened to its previously measured position.
Checking the marking
Check that the marking corresponds exactly. Check the height. See Marking the position of the adjustment nut.
Install the split pin. Tighten the screw. Tighten to 50 Nm.
Checking the oil level in the bevel gear
Check the oil level in the bevel gear. See Bevel gear See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Bevel
Gear, Replacing Bevel gear, B5254T2, AW50/51 AWD See: Service and Repair/Removal and Replacement/Automatic Transmission
Components/Bevel Gear, Replacing Bevel gear, B5254T2, M58 See: Service and Repair/Removal and Replacement/Automatic Transmission
Components/Bevel Gear, Replacing.
Note! To install the drive shaft, see Bevel gear See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Bevel
Gear, Replacing Bevel gear, B5254T2, M58 See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Bevel
Gear, Replacing Bevel gear, B5254T2, AW50/51 AWD See: Service and Repair/Removal and Replacement/Automatic Transmission
Components/Bevel Gear, Replacing.
Sealing Rings Connecting Socket, Replacing
Sealing rings connecting socket, replacing
Special tools:
999 5777 Extractor See: Tools and Equipment/999 5777 Extractor
999 5575 PULLER CYLINDER USED WITH HYDRAULIC PUMP -5576 See: Tools and Equipment/999 5575 Puller Cylinder Used With Hydraulic
Pump -5576
999 5576 HYDRAULIC PUMP See: Tools and Equipment/999 5576 Hydraulic Pump
999 2615 Hydraulic pump See: Tools and Equipment/999 2615 Hydraulic Pump
999 7181 Drift See: Tools and Equipment/999 7181 Drift
999 7182 Drift See: Tools and Equipment/999 7182 Drift
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
