V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Note! For cars with a vibration damper on the Active on Demand Coupling flange.Use 55 mm long screws for the puller. The oil pump may be
damaged if too long screws are used.
Check that the mating surface on the flange is not damaged. If necessary replace the flange.
Removing the seal
Remove the seal from the Active on Demand Coupling. Use extractor 999 5069 EXTRACTOR See: Tools and Equipment/999 5069 Extractor.
Check thoroughly that no seal residue remains.
Installation
Installing the seal
Lubricate the new seal using oil for the Active on Demand Coupling, P/N 116 1641 (1 liter pack).
Use drift 999 7025 Drift Haldex coupling See: Tools and Equipment/999 7025 Drift Haldex Coupling for installation. Tap the seal into place until the
surface of the drift is against the housing for Active on Demand Coupling.
Installing the flange
