V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Check that there are no seal remnants.
Removing the drive shaft sealing ring
Remove the sealing ring for the drive shaft and O-ring for the connector sleeve.
Use a screwdriver.
Check that there are no seal remnants.
Installing the O-ring and sealing ring
Install:
-
a new O-ring for the connector sleeve on the differential housing
-
a new sealing ring for the drive shaft.
Lubricate the seal using the wheel bearing grease, P/N 116 1241-3.
Use drift 999 5654 Punch See: Tools and Equipment/999 5654 Punch.
Installing the sealing ring
Install the sealing ring for the connector seal.
Lubricate the seal using the wheel bearing grease, P/N 116 1241-3.
Use drift 999 5657 Punch See: Tools and Equipment/999 5657 Punch.
Tap in the seal until the drift bottoms on its stop against the gearbox.