V70 AWD L5-2.4L Turbo VIN 56 B5254T (1998)
4. Remove big end bearing caps:
-
Check markings on bearing caps and connecting rods.
Mark with a number punch or die as necessary.
-
Check centering of bearing shells in connecting rods and caps.
CAUTION:
-
Do not mix up different crankshaft bearing shells.
-
Do not rotate crankshaft.
5. Lift crankshaft out of cylinder block:
-
Support crankshaft in suitable V-blocks on two outermost main journals.
-
Remove remaining main bearing shells from block.
-
Mark position of thrust bearing.
CAUTION: Do not mix up different main bearing shells.
6. Remove pistons from block:
-
In order to overcome ring friction press pistons carefully out by hand.
-
Taking care not to scratch bores, remove pistons and connecting rods from bores.
7. Clean joint faces: