V70 AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Removing Front Bracket
-
Remove the entire mounting from the bracket by pulling it towards the right of the car.
-
Disconnect the hose between the EVAP canister shut-off valve and air cleaner (ACL) from the clamp on the fuel tank.
Hint: Note position of hose in the clamp in case it opens. The hoses must be reinstalled in their original positions.
Installing New Fuel Tank Pressure Sensor
-
Remove the screw
-
Remove clamp
Note! The clamp will be reused.
-
Disconnect hose.
-
Remove cable harness.
-
Install the new pressure sensor, route cabling as before.
Removing Clamp:
-
Squeeze clamp with a pipe wrench. Hold in place.
-
Pry apart with a small screwdriver.
Installing Clamp:
-
Press in the clamp with a pipe wrench until it locks.