V70 FWD L6-3.2L VIN 98 B6324S (2008)
-
Insert the rear end of the panel in the rear panel section. Ensure that the groove in the panel aligns with the locating pin in the rear panel section
and the hooks engage (small image).
-
Press the panel onto the body. Ensure that all cables are free running and are not trapped, and that all clips have engaged.
-
Take new clips with central pin from the kit and press the panel on the body. Ensure that all the clips engage properly.
Applies to the XC70
-
Take new clips from the kit. Install these at the upper edge and at the front end of the door sill panel.
