volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes > < Brake Pipe Master Cylinder / ABS Unit, Replacing|Page 8062
Page 2
background image

Note! Be prepared to collect escaping fluids.

Remove the following items:

-

Torque: Brake hose to rear brake caliper, 18 Nm

Torque: Brake hose to rear brake caliper, 35 Nm

-

Torque: Ã˜6 mm diameter brake line, 14 Nm

Installation

Warning! Make sure that the brake hose is not twisted and is correctly located.

To install, reverse the removal procedure.

Bleed the brake system.  Refer to: Brake system bleeding See: Brake Bleeding/Service and Repair 

Hydraulic Control Assembly - Antilock Brakes > < Brake Pipe Master Cylinder / ABS Unit, Replacing|Page 8062