V70 GL L5-2.4L VIN 55 B5254S (1998)
Position a crimping sleeve in the crimping tool 951 2649, in crimping slot "A" (This is easier on a workbench).
Squeeze the crimping tool a little to secure the crimping sleeve in the tool.
Install crimping sleeve
Place both cable ends (same color) in the crimping sleeve in the crimping tool. Insert cables in crimping sleeve so that their insulation comes up to but
not into the crimping sleeve. Both cables should be inserted from the same direction (parallel).
Note: Insert cables in the crimping tool on the side without text!
Press crimping sleeve tight.
Check by hand that crimping sleeve is secure.
Splice the cable pairs
