V70 GL L5-2.4L VIN 55 B5254S (1998)
Note!
Take care when handling the new brake disc. Careless handling can cause damage (e.g. warping).
- Install new brake disc on hub.
- Install locating pin and tighten to 8 Nm (6 ft. lb).
[RRRA8]
- Install brake caliper with new bolts. Tighten to 60 Nm (45 ft.lb).
- Install brake pipe in clips.
- Install three way connector mounting bolt, (LH brake caliper only).
[RRRA9]
Finishing
- Go to Rear Wheel Brake Linings, Replacement [NNNA7-NNNA12]. See: Brake Pad/Service and Repair
