volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bleeding Brakes With Bleeding Unit [AAAA]|Page 5101 > < Bleeding Brakes With Bleeding Unit [AAAA]|Page 5099
Page 3
background image

- RH front wheel
- LH rear wheel
- RH rear wheel

Remove:

- Bleeding unit connector from brake fluid reservoir.

[AAAA6]

Check

Check if there is any air left in the system by depressing the brake pedal as if braking sharply (a braking power equivalent to 200 N). With the engine
off and the brake pedal depressed 3-4 times, the pedal travel should not exceed 40 mm (1.6 in).
If pedal travel exceeds 40mm (1.6 in), bleed again and then re-check pedal travel.
Check that brake fluid level is not over the MAX mark.

Bleeding Brakes With Bleeding Unit [AAAA]|Page 5101 > < Bleeding Brakes With Bleeding Unit [AAAA]|Page 5099