volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Brake Fluid, Replacement With Bleeding Unit [CCCC]|Page 5126 > < Brake Fluid|Specifications|Page 5123
Page 1
background image

Brake Fluid: Service and Repair
Brake Fluid, Replacement With Bleeding Unit [CCCC]

CCCC. Brake fluid, replacement with bleeding unit

Special tools: 115 8147, 999 2809

[CCCC1]

Replacement guidelines

Replacing brake fluid is recommended every 48,000 km (30,000 miles), or every other year. In cars where the brakes are used and often (e.g. in hilly
areas or in tropical climates where humidity levels are high), fluid should be relaced each year.

[CCCC2]

Background

The reason that brake fluid should be changed is that brake fluid is hygroscopic: that is, it absorbs water molecules from the air. Water is partly
absorbed through the brake hoses and brake fluid reservoir, which are made of rubber and plastic respectively, and are to some extent permeable to
water molecules. Increasing the water content of brake fluid means that the brake fluid's boiling point falls dramatically and that corrosion forms on
the braking system components. The result is that the braking system is damaged and its functioning seriously impaired.

Note!

Use only Volvo original brake fluid marked DOT 4+. Never re-use brake fluid.Always keep brake fluid in its original packing, well sealed.

[CCCC3]

Preparations

Ignition off

- Jack car up and remove wheels.
- Clean around brake fluid reservoir cap.
- Remove filling cap.
- Get a drain bottle and hose to collect brake fluid in.
- Set bleeding unit to 0.2 - 0.3 MPa (29-42.7 psi).

[CCCC4]

Connecting bleeding unit

- connect bleeding unit to brake fluid reservoir. 

Follow manufacturers' instructions for connecting and using bleeding unit.

[CCCC5]

Replacing brake fluid LH front

Remove:

- Protective cap from bleed nipple on front LH brake caliper.

Brake Fluid, Replacement With Bleeding Unit [CCCC]|Page 5126 > < Brake Fluid|Specifications|Page 5123