V70 GL L5-2.4L VIN 55 B5254S (1998)
[DDDD10]
Finishing work
- Depress brake pedal repeatedly until brake pistons return to normal position.
- Check brake fluid level and install reservoir cap.
Clean off any brake fluid spillage with lukewarm water and car-wash shampoo.
[DDDD11]
Installing wheels
Make sure that brake disc and rim contact surfaces are clean.
- Grease hub center rim guide with anti-rust agent 116 1038-3.
- Re-fit wheel.
- Tighten nuts hand tight. Then tighten in a star pattern to 110 Nm. If tightening with a nut wrench, use torque bracket
Note!
Tightening nuts in a star pattern to a specified torque is important to prevent stresses arising in the brake disc.
