V70 GL L5-2.4L VIN 55 B5254S (1998)
Parking Brake Lever: Service and Repair
Parking Brake Lever, Overhauling
Parking brake lever, overhauling
Preparations
-
Check that ignition is switched off.
-
Remove battery negative lead.
Removing center console
-
Remove cigarette lighter panel (2 bolts).
-
Tighten parking brake and put gearshift in neutral.
-
Remove the two cover panels, one under the parking brake lever and the other under the armrest.
-
Remove the four console bolts.
-
Undo the connectors on the front of the console.
-
Lift the rear end of the bracket first and push it forwards until the parking brake lever comes free in front of the console cross-member.
-
Now lift front and remove bracket.
-
Remove connector from parking brake contact.
-
Remove contact mounting bolt and contact itself.
-
Remove parking brake lever mounting bolts (3).
-
Remove brake cables and remove complete lever unit.