V70 GL L5-2.4L VIN 55 B5254S (1998)
-
Remove brake vacuum hose from intake.
-
Remove control module box air duct and air cleaner (ACL) intake air hose.
-
Remove connectors, relays and canister purge (CP) valve from fan shroud. Place wiring to one side.
-
Remove screws from fan shroud and relay holder mounting.
-
Lift relay holder.
-
Lift up engine cooling fan (FC) with cover.
Install camshaft adjustment tool
-
Remove starter motor mounting screws (x3). Place starter motor to one side.
-
Remove blind cover plug.
-
Turn the crankshaft slightly clockwise.
-
Install camshaft adjustment tool 999 5451 . Ensure that it reaches down as far as the cylinder block.
-
Carefully turn crankshaft counter-clockwise as far as it will go against the camshaft adjustment tool.
-
Check that the marking on the crankshaft timing gear pulley corresponds with the marking on the oil pump.
Install timing gear pulleys and timing belt
