V70 GL L5-2.4L VIN 55 B5254S (1998)
Secure camshaft pulleys
Tighten the camshaft screws (2 x 3) to 20 Nm
Turn engine crankshaft two turns
Pull lock pin out of tensioner damping unit
Position upper timing cover.
Turn the crankshaft two revolutions and check that the markings on the crankshaft and camshaft pulleys are align.
Install
-
the two fuel line clamps
-
front timing cover
-
accessory belt
-
spark plug cover
-
expansion tank
-
vibration damper protective panel
-
fender liner, wheel
Test function
Test run engine.