V70 GL L5-2.4L VIN 55 B5254S (1998)
Central Electronics Box: Service and Repair
Replacing Control Module Connector
Removing:
GD1 Removing the Rubber Mat:
NOTE: Disassemble control module box according to GC1 - GC5. See: Replacing Control Module Box
-
Remove silicon rubber mat from holder.
-
Take apart the holder and told it to release the catch.
GD2 Disconnecting Connector:
-
Turn the holders and press together the control module connector pawls.
-
Pull the connector out of the holder.
GD3 Removing Terminal Pins:
-
Mark the position of the terminal pins in the connector.
-
Remove the terminal pins, use an instrument screw- driver to release the catches.