V70 GL L5-2.4L VIN 55 B5254S (1998)
5. Turn ignition key to position I or II.
-
Press cable into position in ignition lock.
-
Ensure that locking tabs are securely engaged in ignition lock.
-
Move gear shift lever to position P.
Check that clearance between cable and locking plate is approx. 0.5-1.0 mm (0.19-0.4 inch).
Check Of Key Lock Function
6.
Move gear shift lever to position P.
-
Ignition key should be easy to remove from ignition lock.
-
If key cannot be removed, cable is too short.
Adjust by slackening cable at adjustment point and repeat check.
7. Move lever to position other than P.
-
It should not be possible to remove the ignition key from ignition lock.
-
If key can be removed, cable is too long.
Adjust by tightening cable at adjustment point until key cannot be removed.