V70 GL L5-2.4L VIN 55 B5254S (1998)
8. Move gear shift lever from P to another position.
-
Clearance between locking tabs at ignition switch end is approx. 7 mm (0.28 inch).
Adjust at the gear lever end.
9. Turn ignition key to position I or II.
-
Press cable into position in ignition lock.
-
Ensure that locking tabs are securely engaged in ignition lock.
-
Move gear shift lever to position P. Check that clearance between cable and locking plate is approx. 0.5-1 mm (0.19-0.4 inch).
Check Of Key Lock Function
10. Move gear shift lever to position P.
-
Ignition key should be easy to remove from ignition lock.
-
If key cannot be removed, cable is too short.
-
Adjust by slackening cable at adjustment point and repeat check.
