V70 GL L5-2.4L VIN 55 B5254S (1998)
8. Accumulator piston and valve spring specifications
-
Refer to the table above.
NOTE: Also refer to step 4
9. Replace accumulator piston seals.
-
Lubricate new seals with ATF oil.
-
Take care to ensure that seal ends are not damaged!
10. Reinstall accumulator pistons and springs.
-
Reinstall valves and springs.
-
Reinstall cover plate and gasket.
Tighten 6 screws to: 6.5 Nm.
CAUTION: Excessive torque may impose stress on system, causing valves to stick.
11. Finishing
-
Reinstall control system.
Refer to steps 22 through 38 of Open The Control System. See: Valve Body/Service and Repair
