V70 GL L5-2.4L VIN 55 B5254S (1998)
Seals and Gaskets: Service and Repair
Differential Side Seal, Automatic Transaxle
SPECIAL TOOLS
-
Handle tool No. 999 1801, or equivalent
-
Disconnecting tool No. 999 5462, or equivalent
-
Drift tool No. 999 5541, or equivalent
-
Protective sleeves tool No. 999 5562, or equivalent
-
Protractor tool No. 951 2050, or equivalent
-
Refer to special tool section for additional tool information. See: Tools and Equipment
PROCEDURE
1. If it will be necessary to replace or repair drive shafts, refer to Axle Shaft Assembly, Constant Velocity Type
2. Remove front wheels
-
Detach:
Bracket for brake hose and ABS cable.
Let bracket hang loose.
Link from anti-roll bar
Link/ball joint from stub axle (both sides).
Install protective sleeves tool No. 999 5562, or equivalent, on ball joints.
3. Left side:
-
Detach drive shaft from transmission
-
Use disconnecting tool No. 999 5462, or equivalent, between the transmission and the inside of drive shaft joint.
-
Fold out spring strut and remove drive shaft from transmission.
-
Let drive shaft end rest on sub-frame.