V70 GL L5-2.4L VIN 55 B5254S (1998)
Check the stub axle surfaces mating against the wheel bearing unit.
Also check the screw head mating surfaces on the stub axle.
Lubricate all the mating surfaces a little.
Install the wheel bearing unit with new screws.
Lubricate the outer threads a little and tighten crosswise to 65 Nm (47.9 ft. lbs.).
Angle-tighten the screws for the wheel bearing unit to 60°. Use protractor 951 2050.
Finishing
Check the drive shaft for damage to the mating surfaces with the wheel bearing.
Check the booms (splines).
Clean the pulse wheel and check the shape of its cogs.
Lubricate the booms (splines) and mating surfaces to the wheel bearing a little.
